|
|
Recommended
|
Configuration Note
|
|
Compute
|
|
|
General Purpose
|
DS4v2 Standard / 8 cores
|
Standard: A good starting point in regards to memory and CPU resources. This category is suited to handle the processing and caching with minimal requirements for network bandwidth.
|
|
High
|
DS5v2 Standard / 16 cores
|
Medium: Good for workloads that are read intensive and will benefit from the larger memory-based read cache for this category. The additional CPU will also provide better performance when deduplication, encryption, compression and/or RAID is enabled.
|
|
Extreme
|
DS15v2 / 20 cores
|
High: This category can be used for workloads that require a very high speed network connection due to the amount of data transferred over a network connection. In addition to the very high speed network, this level of instance gives you a lot more storage, CPU and memory capacity.
|
|
Memory
|
|
|
Base RAM - General Purpose
|
28 GB /DS4v2 Standard/Premium
|
Premium or Standard storage
|
|
Base RAM - High
|
56 GB /DS5v2 Standard/Premium
|
Premium or Standard storage
|
|
Base RAM - Extreme
|
140GB / DS15v2 Standard/Premium
|
Local SSD, large-scale use with increased RAM caching, premium or standard storage
|
|
Additional RAM
|
1 GB per 1 TB of deduplicated storage.
|
Recommended for best performance
|
|
e.g.: 50 TB deduplicated storage = 50 *additional* GB for deduplication tables for best performance.
|
|
Storage
|
|
|
Boot Disk
|
30 GB Hard disk for Linux boot and system disk (included)
|
|
Data Disk - General
|
Standard Azure Data Disks (DS Standard Series)
|
|
High IOPS
|
Azure Premium Storage (DSv2 Standard Series)
|
|
RAID 10
|
Recommended for I/O-intensive applications and databases
|
|
RAID 5/6
|
Recommended for best space utilization (tradeoff: slower write performance)
|
|
Network
|
|
|
Up to 120 MB/sec - 1GbE
|
Less overhead cost
|
|
|
500+ MB/sec - 10 GbE
|
Better performance (requires more resources)
|
Consider MTU 4000 configuration for optimal performance
|
Note: As of version 3.4.8 SoftNAS does not support launching SoftNAS Cloud VMs on the classic portal. The Azure Resource Manager (ARM) is the only supported platform.
SoftNAS Cloud® System Capacities
Listed below is a table representing the capabilities of the SoftNAS Cloud® for Microsoft Azure.
|
|
SoftNAS Cloud® Capacity
|
Configuration Note
|
|
Editions
|
|
|
SoftNAS Cloud® Express
|
1TB
|
Available as Azure subscription and BYOL from SoftNAS.
|
|
SoftNAS Cloud® Standard
|
16 PB
|
Available as Azure subscription and BYOL from SoftNAS.
|
|
Free Tier
|
DS3 Standard (100GB)
|
Limited performance and functions. Advanced capabilities such as SnapReplicate and SNAP HATM are not available.
|
|
Memory
|
|
|
RAM Cache
|
1 GB to 100 GB
|
Defaults to 50% total RAM for read cache
|
|
SSD Cache
|
low-speed level 2 cache
|
Optional
|
|
Ephemeral Cache
|
low-speed level 2 cache
|
Optional for read cache
|
|
Storage
|
|
|
Maximum Storage
|
16 TB/16PB
|
16 TB - Maximum usable block storage capacity on Azure Marketplace, contingent on instance type.
16PB - Can be extended up to 16 petabytes by leveraging multiple Azure Blob storage accounts.
|
|
# of Storage Pools
|
Unlimited
|
|
|
# of Volumes
|
Unlimited
|
|
|
# of Snapshots
|
Unlimited
|
|
|
# of Snapshot Clones
|
Unlimited
|
|
|
SnapReplicate
|
Unlimited Pools & Volumes
|
|
|
SnapReplicate Throttle
|
56Kb/sec to Unlimited bandwidth
|
|
|
Active Directory
|
Kerberos Integration
|
|
|
Files and Directories
|
Unlimited
|
|
|
Network
|
|
|
Schedules
|
Unlimited
|
|
|
NFS Exports:
|
Linux Default
|
|
|
iSCSI Targets
|
Linux Default
|
|
|
CIFS Shares
|
Linux Default
|
|
|
Firewall Ports:
|
22 (ssh), 443 (https)
|
Plus NFS, iSCSI, and CIFS, and AFP as required
|
|
IP Tables Firewall
|
Off by default
|
May be configured, but is not required. Use an alternative method to set Security Groups unless added firewall protection on SoftNAS Cloud® instance is required.
| |